1. Introduction to Computer Aided Sketching
Introduction, Drawing Instruments and their uses,
BIS conventions, lettering Dimensioning and free hand practicing.
Computer screen, layout of the software, standard tool bar/menus and description of most commonly used tool bars, navigational tools.
Coordinate system and reference planes.
Definitions of HP, VP, RPP & LPP.
Creation of 2D/3D environment. Selection of drawing size and scale.
Commands and creation of Lines, Co-ordinate points, axes, poly-lines, square, rectangle, polygons, splines, circles, ellipse, text, move, copy, off-set, mirror, rotate, trim, extend, break, chamfer, fillet, curves, constraints viz. tangency, parallelism, inclination and perpendicularity. Dimensioning, line convention, material conventions and lettering.
2-Sheet
2. Orthographic Projections
Introduction, Definitions- Planes of projection,
reference line and conventions employed,
Projections of points in all the four quadrants,
Projections of straight lines (located in First quadrant/first angle only),
True and apparent lengths,
True and apparent inclinations to reference planes (No application problems). 2-Sheet
3. Orthographic Projections of Plane Surfaces
(First Angle Projection Only)
Introduction,
Definitions-projections of plane surfaces-triangle,
square rectangle,
rhombus,
pentagon,
hexagon and circle,
planes in different positions by change of position method only (No problems on punched plates and composite plates.) 1-Sheet
4. Projections of Solids (First Angle Projection Only)
Introduction, Definitions- Projections of right regular- tetrahedron, hexahedron (cube), prisms, pyramids, cylinders and cones in different positions. (No problems on octahedrons and combination solid) 2-Sheet
5. Sections and Development of Lateral Surfaces of Solids
Introduction, Section planes, Sections, section views, Sectional views, apparent shapes and True shapes of Sections of right regular prisms, pyramids, cylinders and cones resting with base on HP. (No problems on section of solids) 1-Sheet
Development of lateral surface of above solids, their frustums and truncations. (No problems on lateral surfaces of trays, Tetrahedrons spheres and transition pieces).
6. Isometric Projection (Using Isometric Scale Only)
Introduction, Isometric scale, Isometric Projection of simple plane figures, Isometric Projection of tetrahedron, hexahedron (cube), right regular prisms, pyramids, cylinders, cones, spheres, cut spheres and combination of solids (Maximum of three Solids). 1-Sheet
Note : At least 3 drawing assignments must be on AUTOCAD.
Text Book
1. Engineering Drawing – N.D. Bhatt & V.M. Panchal, 48th edition, 2005 Charotar Publishing House, Gujarat.
2. A Primer on Computer Aided Engineering Drawing-2006, Published by VTU, Belgaum.
Reference Book
1. Computer Aided Engineering Drawing – S. Trymbaka Murthy, - I.K. International Publishing House Pvt. Ltd., New Delhi, 3rd revised edition-2006.
2. Engineering Graphics – K.R. Gopalakrishna, 32nd edition, 2005 – Subash Publishers Bangalore.
3. Fundamentals of Engineering Drawing with an Introduction to Interactive Computer Graphics for Design and Production – Luzadder Warren J., duff John M., Eastern Economy Edition, 2005 – Prentice- Hall of India Pvt. Ltd., New Delhi.
Introduction, Drawing Instruments and their uses,
BIS conventions, lettering Dimensioning and free hand practicing.
Computer screen, layout of the software, standard tool bar/menus and description of most commonly used tool bars, navigational tools.
Coordinate system and reference planes.
Definitions of HP, VP, RPP & LPP.
Creation of 2D/3D environment. Selection of drawing size and scale.
Commands and creation of Lines, Co-ordinate points, axes, poly-lines, square, rectangle, polygons, splines, circles, ellipse, text, move, copy, off-set, mirror, rotate, trim, extend, break, chamfer, fillet, curves, constraints viz. tangency, parallelism, inclination and perpendicularity. Dimensioning, line convention, material conventions and lettering.
2-Sheet
2. Orthographic Projections
Introduction, Definitions- Planes of projection,
reference line and conventions employed,
Projections of points in all the four quadrants,
Projections of straight lines (located in First quadrant/first angle only),
True and apparent lengths,
True and apparent inclinations to reference planes (No application problems). 2-Sheet
3. Orthographic Projections of Plane Surfaces
(First Angle Projection Only)
Introduction,
Definitions-projections of plane surfaces-triangle,
square rectangle,
rhombus,
pentagon,
hexagon and circle,
planes in different positions by change of position method only (No problems on punched plates and composite plates.) 1-Sheet
4. Projections of Solids (First Angle Projection Only)
Introduction, Definitions- Projections of right regular- tetrahedron, hexahedron (cube), prisms, pyramids, cylinders and cones in different positions. (No problems on octahedrons and combination solid) 2-Sheet
5. Sections and Development of Lateral Surfaces of Solids
Introduction, Section planes, Sections, section views, Sectional views, apparent shapes and True shapes of Sections of right regular prisms, pyramids, cylinders and cones resting with base on HP. (No problems on section of solids) 1-Sheet
Development of lateral surface of above solids, their frustums and truncations. (No problems on lateral surfaces of trays, Tetrahedrons spheres and transition pieces).
6. Isometric Projection (Using Isometric Scale Only)
Introduction, Isometric scale, Isometric Projection of simple plane figures, Isometric Projection of tetrahedron, hexahedron (cube), right regular prisms, pyramids, cylinders, cones, spheres, cut spheres and combination of solids (Maximum of three Solids). 1-Sheet
Note : At least 3 drawing assignments must be on AUTOCAD.
Text Book
1. Engineering Drawing – N.D. Bhatt & V.M. Panchal, 48th edition, 2005 Charotar Publishing House, Gujarat.
2. A Primer on Computer Aided Engineering Drawing-2006, Published by VTU, Belgaum.
Reference Book
1. Computer Aided Engineering Drawing – S. Trymbaka Murthy, - I.K. International Publishing House Pvt. Ltd., New Delhi, 3rd revised edition-2006.
2. Engineering Graphics – K.R. Gopalakrishna, 32nd edition, 2005 – Subash Publishers Bangalore.
3. Fundamentals of Engineering Drawing with an Introduction to Interactive Computer Graphics for Design and Production – Luzadder Warren J., duff John M., Eastern Economy Edition, 2005 – Prentice- Hall of India Pvt. Ltd., New Delhi.
0 comments:
Post a Comment